|
Interior Products
| Innovate Standalone Gauge Kit | 3781 |
 | The Innovate Standalone Gauge Kit comes complete with the patented award-winning LC-1 Wideband Controller, NEW! XD-16 (16 in 1) 52mm Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide.
The Innovate XD-16 dash-mountable Digital Display ships as an AFR gauge, but can also be configured to display any channel of the Modular Tuning System. Key features:
-2 Bezels + 8 faces = 16 combinations (see below)
-3/4 in thick, so it's possible to mount even in surface mount configurations
-3-character LED display
-Record/Calibrate/Peak Hold button
-Programmable (values and colors) digital needle
-Billet Aluminum bezel
The kit also includes:
-Male 2.5 to 2.5 cable to connect XD-16 to an LC-1, AuxBox, LM-1, ST-12, or DL-32
-Terminator Plug
-Mounting Hardware Kit
-Cable to connect to a PC for real-time logging and programming. | GSP Price:
$399.00
More Info.. |
|
| Mini Cooper Floor Mount Adaptors | |
 | VAC Motorsports CAD designed and CNC machined Billet Aluminum Floor Mount Adapters allow lowest install of any seat brackets available. * Allow easy install of Momo or other racing seats * Adapts side mount seat brackets to the factory floor mounting points * Lightweight design * Kit comes complete with hardware and installation instructions for one seat * Made From 3/4" Thick 6061-T6 Billet Aluminum | GSP Price:
$169.00
More Info.. |
|
| Madness Motorworks MINI Cooper Gauge Pods | |
 | Are you Craving to know just how much boost your running? Add these dual fully adjustable gauge pods to you MINI to monitor the critical information necessary for a highly tuned MINI. These pods mount in minutes and swivel 360 degrees alowing the ultimate in adjustability. The pods hold any combination of 2 1/16 to 2.5 inch gauges and are fully enclosed in the rear to hide wires and gauge backs.
The kit includes NO gauges, pod only
| GSP Price:
$169.00
More Info.. |
|
| Madness Motorworks MINI Cooper Schroth Rally 4asm 4 Point MINI Harness | |
 | Designed specifically for the new MINI Cooper and Cooper S. These unique belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Most points simply click into the MINI factory seat belt female receptacles. Where an additional attachment point is needed, a small quick release connector is installed to a readily accessible stock seat belt point in less than ten minutes. When not in use, the entire harness is simply unclicked and removed from the car in under a minute. This is the first and currently the only DOT approved aftermarket harnessbelt of its kind. No drilling holes or removal of factory belts. This belt piggybacks the factory seatbelt bolt points.
Another key point is that the MINI belt utilizes the factory pre-tensioner by clipping into the factory female receptacle. The pre-tensioner tightens the lap belt about 2 inches during an impact, further preventing the occupant from submarining. Also, since the MINI Belt clips into the female receptacle, the computer recognizes the seat belt is in use and deploys the airbag at a slower, less violent rate.
The Rally-4 asm | GSP Price:
$264.00
More Info.. |
|
| Madness Motorworks New R53 MINI Cooper no holes license plate frame | |
 | Does your state require a front license plate? Do you HATE the idea of drilling holes into your beloved MINI bumper? Do you want to avoid the ticket from the ever-friendly traffic officer? Here is the answer to your dilemma.
This "No Holes" License Plate Bracket (LPB) does not require you to drill into your front bumper. Instead, it utilizes a custom machined bolt that screws into the towhook hole. All parts are made from Stainless Steel to ensure no rust. The mounting hardware utilizes nylock nuts which will not loosen from vibration. The plate attachment screws are button head socket cap screws for a nice clean look.
The Vertical Adjustment Bars are here! Here are the 6 positions that you can mount your plate. | GSP Price:
$55.00
More Info.. |
|
| Madness Motorworks Steering wheel quick disconnect | |
 | Our Mini Cooper Steering Wheel Quick Disconnect is an easy bolt on. It is made from 6061 Aluminum for strength and durability. This unit uses a hex shaped bolt on shaft that is slop free. We QC our adapters to make sure that there is no radial play at all. | GSP Price:
$199.00
More Info.. |
|
| Madness Motorworks Stripe kit | |
 | Our MINI Stripe Kits makes your MINI Cooper even more unique! Although the factory offers "bonnet stripes" as a factory or dealer installed option, it costs $80 and is on the hood only! Our Stripe kits include a complete front and rear kit (roof kit available separately), and gives the MINI a very aggressive demeanor,.
The stripe kits made from a high-performance vinyl film rated to last 7 years of outdoor life. This film may be easily removed in the future if so desired.
Complete Kit Includes:
* Computer cut vinyl stripes for accuracy (to do hood and trunk)
* Squeegee
* Complete installation directions
Installation takes approximately 2 hours and a razor blade and hairdryer are recommended. Some minor disassembly and trimming is required for the best results. | GSP Price:
$99.00
More Info.. |
|
|
|
