|
Engine/hardware Products
| Integrated Engineering 2.0T FSI Drop-In-Rods VW Audi | call to get yours installed to day! |
 | Integrated Engineering is proud to manufacture the highest quality connecting rods available for European
applications, at a reasonable price. This is accomplished through careful design, manufacturing, and quality
control processes. With hundreds and hundreds of sets of VW and Audi connecting rods in stock, we are
your specialist supplier with the inventory and knowledge to make your project a success.
One of the hallmarks of a high quality connecting rod is its strength to weight ratio. Anyone can create an
extremely strong rod out of a huge chunk of steel. Creating one with a reasonable weight that works well in
today's high rpm european applications, and holds up to a lifetime of torture is another story.
In order to create this balance of strength and light weight, an H beam design is utlized. The design is validated
and optimized using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as
light and strong as possible.
The material specification and treatment is equally important to producing a quality connecting rod with a high strength to
weight ratio. Our steel rods feature 4340 Chrome Moly steel, formed into shape using a 2 piece forging for the highest
possible fatigue life. The material is multi-stage heat treated to ensure the highest possible fatigue strength as well as good
dimensional stability. This feature ensures that our big ends stay round for a lifetime of bearing trouble free service.
Following this pattern of high quality, ARP 2000 rod bolts are standard in all of our applications, while they are an upgrade at
additional cost in many of our competitors.
| GSP Price:
$399.99
More Info.. |
|
| Integrated Engineering Crankshaft Girdle Kit for VW/Audi 2.0T FSI Engines | call to get yours installed to day! |
 | Under high RPM and power use your block can begin to flex, causing severe main bearing wear or even a broken crank. Reinforcing the block is a necessity for these extreme applications. This girdle kit uses a 3/8" steel plate to bolt on the underside of your block to reinforce it and prevent from flexing under high power use. The girdle plate bolts to all of the main journals, using the supplied extended-length ARP main stud kit. It is then sandwiched between the block and the oil pan to keep the block from flexing. This kit includes all lengthened hardware needed to install the girdle plate. Spacers are included for use with factory main caps, but IE "Tall Boy" billet main caps are a highly recommended for high power builds. This kit will remove the factory balance shaft/oil pump assembly, and replace it with a chain driven oil pump | GSP Price:
$799.99
More Info.. |
|
| Integrated Engineering Mahle PowerPack 83.5MM Bore 9:1 CR 2.0T FSI Piston Set | call to get yours installed to day! |
 | This is a set of extremely high quality Mahle PowerPack pistons for the 2.0T FSI engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 2618 alloy, which makes for a very strong piston. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt. These also features hard anodized top ring grooves to prevent deformation in extreme duty applications.
Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match.
| GSP Price:
$659.99
More Info.. |
|
| Integrated Engineering Mahle PowerPack 83MM Bore 9:1 CR 2.0T FSI Piston Set | call to get yours installed to day! |
| This is a set of extremely high quality Mahle PowerPack pistons for the 2.0T FSI engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 2618 alloy, which makes for a very strong piston. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt. These also features hard anodized top ring grooves to prevent deformation in extreme duty applications.
Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match.
| GSP Price:
$659.99
More Info.. |
|
|
|
