 |
|
Engine/hardware Products
| 1.8t 20v 2.0L Stroker Kit (06a) (MAHLE Pistons) | to order or setup a build call 480-747-6150 |
 | This stroker kit features a set of IE 20mm rods, Mahle Pistons and a genuine, forged VW 2.0 FSI crank shaft. It utilizes an 83mm bore Mahle piston to achieve 2008CC displacement, with 9:1 Compression. This is a very robust setup which is an upgrade from standard 1.8t parts in every way. It provides quicker spool, more torque off boost, and more power and torque per pound of boost. You will lower cylinder pressures at a given output, allowing you to stretch low octane pump gas (91-94 octane) further, making your car that much more of a serious contender on your day to day pump fuel.
| GSP Price:
$1914.99
More Info.. |
|
| Gates Reinforced Racing timing belt, 06A/06B | to order or setup a build call 480-747-6150 |
 | Incredibly strong, extremely heat resistant. Tough enough to take the worst pummeling your engine can dish out. No other belts help protect your engine and deliver high performance like Gates Racing Performance Timing Belts.
Yes, the color gives you a hot custom look. But look deeper. Constructed of HNBR elastomeric composites, Gates Racing Performance Timing Belts are 300% stronger than stock belts and deliver up to three times the heat resistance. You can count on them to hold up to the rigors of high horsepower, even with interference engines.
| GSP Price:
$109.00
More Info.. |
|
| Integrated Engineering 06A 1.8T Crankshaft Girdle Kit | call to get yours installed to day! |
 | Under high RPM and power use your block can begin to flex, causing severe main bearing wear or even a broken crank. Reinforcing the block is a necessity for these extreme applications. This girdle kit uses a 3/8" steel plate to bolt on the underside of your block to reinforce it and prevent from flexing under high power use. The girdle plate bolts to all of the main journals, using the supplied extended-length ARP main stud kit. It is then sandwiched between the block and the oil pan to keep the block from flexing. This kit includes all lengthened hardware needed to install the girdle plate. Spacers are included for use with factory main caps, but IE "Tall Boy" billet main caps are a highly recommended for high power builds.
| GSP Price:
$599.99
More Info.. |
|
| Integrated Engineering 1.8T 144X19 Drop-In-Rods VW Audi | call to get yours installed to day! |
 | Integrated Engineering is proud to manufacture the highest quality connecting rods available for European
applications, at a reasonable price. This is accomplished through careful design, manufacturing, and quality
control processes. With hundreds and hundreds of sets of VW and Audi connecting rods in stock, we are
your specialist supplier with the inventory and knowledge to make your project a success.
One of the hallmarks of a high quality connecting rod is its strength to weight ratio. Anyone can create an
extremely strong rod out of a huge chunk of steel. Creating one with a reasonable weight that works well in
today's high rpm european applications, and holds up to a lifetime of torture is another story.
In order to create this balance of strength and light weight, an H beam design is utlized. The design is validated
and optimized using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as
light and strong as possible.
The material specification and treatment is equally important to producing a quality connecting rod with a high strength to
weight ratio. Our steel rods feature 4340 Chrome Moly steel, formed into shape using a 2 piece forging for the highest
possible fatigue life. The material is multi-stage heat treated to ensure the highest possible fatigue strength as well as good
dimensional stability. This feature ensures that our big ends stay round for a lifetime of bearing trouble free service.
Following this pattern of high quality, ARP 2000 rod bolts are standard in all of our applications, while they are an upgrade at
additional cost in many of our competitors.
| GSP Price:
$399.99
More Info.. |
|
| Integrated Engineering Forged 144X20 Rods 1.8T, FSI, Stroker, 16V, early 8V Audi VW | call to get yours installed to day! |
 | Integrated Engineering is proud to manufacture the highest quality connecting rods available for European
applications, at a reasonable price. This is accomplished through careful design, manufacturing, and quality
control processes. With hundreds and hundreds of sets of VW and Audi connecting rods in stock, we are
your specialist supplier with the inventory and knowledge to make your project a success.
One of the hallmarks of a high quality connecting rod is its strength to weight ratio. Anyone can create an
extremely strong rod out of a huge chunk of steel. Creating one with a reasonable weight that works well in
today's high rpm european applications, and holds up to a lifetime of torture is another story.
In order to create this balance of strength and light weight, an H beam design is utlized. The design is validated
and optimized using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as
light and strong as possible.
The material specification and treatment is equally important to producing a quality connecting rod with a high strength to
weight ratio. Our steel rods feature 4340 Chrome Moly steel, formed into shape using a 2 piece forging for the highest
possible fatigue life. The material is multi-stage heat treated to ensure the highest possible fatigue strength as well as good
dimensional stability. This feature ensures that our big ends stay round for a lifetime of bearing trouble free service.
Following this pattern of high quality, ARP 2000 rod bolts are standard in all of our applications, while they are an upgrade at
additional cost in many of our competitors | GSP Price:
$399.99
More Info.. |
|
| Integrated Engineering Mahle 1.8T 20V Piston Set: 81MM Bore, 8.5:1 CR, Stock Stroke | call to get yours installed to day! |
 | This is a set of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expenasion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt.
Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match. | GSP Price:
$659.99
More Info.. |
|
| Integrated Engineering Mahle 1.8T 20V Stroker Piston Set | call to get yours installed to day! |
| This is a set of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expansion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt.
Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match.
CUSTOM MADE TO IE SPECIFICATIONS FOR 92.8MM STROKE CRANKSHAFTS | GSP Price:
$699.99
More Info.. |
|
|
|
|
